Armoroc directly over Marino/WARE JoistRite Joists – 2-Hour Test Report

SMALL SCALE ASTM E 119/UL 263
TWO HOUR FIRE TESTING
FOR MARINOWARE
ON JOIST-RITE WITH ARMOROC FLOOR
VTEC #100-2949-2
TESTED: MAY 23, 2008
REVISION 2.0: OCTOBER 14, 2008

October 14, 2008

Client: Marinoware
137 Broadway, Suite B1
Amityville, NY 11701
Attn: Mr. Nick Camizzi
Subject: Small Scale Two Hour ASTM E119/UL263 Fire Endurance
Screening Testing on Marinoware Joist-Rite with
ARMOROC Panel, as furnished by Ameriform, LLC.

SAMPLE DESCRIPTION:

1- ARMOROC Panel, 3/4” minimum thickness (as manufactured by Jilin Tiancheng) with Pemco P5100 adhesive applied to Armoroc board joints only, screw fastened direct to Joist-Rite Steel framing with #8 Rock-On Climacoat screws. Fastener spacing 12” O.C.
2- 1000JR200-54 Joist-Rite Galvanized steel joists, 10” depth x 16 Ga thickness x 2” flange width. Joists spaced at 16” O.C.maximum. Double joists only at end of panel spaced 7” apart.
3- 1000JT250-54 Galvanized steel Joist-Rite Track receiving ends of Joist-Rite joists, 10” depth x 16 Ga minimum. Screw fastened to top & bottom flange of Joist-Rite joist with #10-16 x 3/4” corrosion resistant self-drilling screws.
4- Galvanized steel Joist-Rite web stiffener, 3-5/8” x 16Ga,placed inside of perimeter Joist-Rite flange and placed outside of other Joist-Rite steel joists. Joist-Rite Web Stiffener attached to web of Joist-Rite with four #10-16 x 3/4” corrosion resistant self-drilling screws.
5- 1000JB16 JoistRite Solid Blocking was placed between the second and third JoistRite joists, between the third and fourth JoistRite joists, between the forth and fifth JoistRite joists, and between the fifth and sixth JoistRite Joists. Screw fastened to top and bottom flange of JoistRite joist with #10-16 x 3/4″ corrosion resistant self-drilling screws through predrilled holes.
6- 1-1/2” CR Channel along the bridging line.
7- Marinoware RC-1 single leg galvanized resilient channel, 1/2” deep x 25 Ga minimum at 12” O.C. screw fastened to bottom flange of Joist-Rite steel joist with #10-16 x 3/4” corrosion resistant self-drilling screws.
8- Thermafiber insulation 4” thick in joist cavity against Armoroc Panel.
9- One layer of 5/8” Type C gypsum board, screw fastened to resilient furring channels with #6 x 1” drywall screws at 12” O.C.

PROCEDURE:

The furnace measures nominally 5 ft x 5 ft x 7 ft. The outside construction is steel and the furnace is lined with a ceramic refractory insulation.

Four burners, one centered on each wall, provide uniform heat.Each burner is rated for 1.5 million Btu/hr and is of the flat flame or non-impinging flame design. Furnace conditions are monitored by four 1/4″ grounded Inconel-sheathed chromel-alumel thermocouples.

The unexposed surface temperature of the sample was monitored by nine, 20-gauge type K, fiberglass sheathed thermocouples. An
insulating pad was placed over each thermocouple on the unexposed side of the sample.

The fire test was run following the E119/UL263 time-temperature curve.

The endpoint for the E119 Fire Endurance Testing occurs when either all the thermocouples on the unexposed side of the sample
reach an average of 250°F + ambient starting temperature, any individual thermocouple on the sample exceeds 325°F + ambient starting temperature, or when the sample experiences burnthrough.

RESULTS:

At 20 minutes, smoke began emitting from the sample.
At 129 minutes, the furnace was voluntarily shut off without reaching any of the end points.

Time Deflection Data
TIME (MINS) DEFLECTION (IN) TIME (MINS) DEFLECTION (IN)
0 0.00 75 0.000
15 0.00 90 0.125
30 0.00 105 0.125
45 0.00 120 0.125
60 0.00 129 0.375

The time-temperature data are contained on the following pages.

__________________ __________________
Neil Schultz Amirudin Rahim
Executive Director Technical Director

Revision 1.0: “Sample Description” was corrected.

Revision 2.0: Added “as furnished by Ameriform, LLC”, “as manufactured by Jilin Tiancheng”, and Armoroc “Panel”

Disclaimer: This test should be used to measure and describe the properties of materials, products or assemblies in response to heat and flame under controlled laboratory conditions. It should not be used to describe or appraise the fire hazards or fire risks of materials, products or assemblies under actual fire conditions. However, results of this test may be used as
elements of a fire risk assessment that takes into account all of the factors that are pertinent to an assessment of fire hazard of a particular end use.

Notice: VTEC Laboratories Inc. will not be liable for any loss or damage resulting from the use of the data in this report, in excess of the invoice. This report pertains to the sample tested only. Such report shall not be interpreted to be a warranty, either expressed or implied as to the suitability or fitness of said sample for such uses or applications, as the party contracting
for the report may apply such sample.

 

TC 1 TC 2 TC 3 TC 4 TC 5 TC 6 TC 7 TC 8 TC 9 TC 10 TC 11 TC 12 TC 13 TC 14 Sample TC 15 Furnace
time Sample Sample Sample Sample Sample Sample Sample Sample Sample Furnace Furnace Furnace Furnace Average Average
min Deg. F Deg. F Deg. F Deg. F Deg. F Deg. F Deg. F Deg. F Deg. F Deg. F Deg. F Deg. F Deg. F Deg. F Deg. F
0 62 62 62 62 62 62 62 62 61 70 73 77 76 74 62
1 62 62 62 62 62 62 62 62 61 196 245 270 242 238 62
2 62 62 62 62 62 62 62 62 61 546 598 639 599 596 62
3 62 62 62 62 62 62 62 62 61 797 810 843 824 819 62
4 62 62 62 62 62 62 62 62 61 901 937 935 933 927 62
5 62 62 62 62 62 62 62 62 61 974 1004 1007 1004 998 62
6 62 62 62 62 62 62 62 62 61 1065 1075 1113 1094 1087 62
7 62 62 62 62 62 62 62 62 61 1116 1118 1138 1134 1126 62
8 62 62 62 62 62 62 62 61 61 1164 1178 1178 1179 1175 62
9 62 62 62 62 62 62 62 62 61 1218 1222 1224 1224 1222 62
10 62 62 62 62 62 62 62 62 61 1311 1307 1315 1320 1313 62
11 62 62 62 62 62 62 62 62 61 1351 1341 1343 1351 1346 62
12 62 62 62 62 62 62 62 62 61 1363 1350 1359 1361 1358 62
13 62 62 62 62 62 62 62 62 61 1380 1365 1377 1374 1374 62
14 62 62 62 62 62 62 62 62 61 1379 1370 1390 1383 1380 62
15 62 62 63 63 63 62 62 62 62 1398 1392 1415 1406 1403 62
16 63 62 63 63 63 62 62 62 62 1514 1351 1457 1443 1441 62
17 63 62 63 63 63 62 62 62 62 1463 1461 1455 1461 1460 62
18 63 63 63 64 63 62 62 62 62 1499 1499 1415 1473 1471 63
19 63 63 63 64 64 62 62 62 62 1482 1481 1472 1479 1478 63
20 63 63 63 65 64 63 63 63 62 1295 1575 1568 1481 1480 63
21 63 63 63 66 65 63 63 63 62 1494 1491 1484 1491 1490 63
22 63 64 63 66 65 63 63 63 62 1507 1506 1502 1511 1507 64
23 64 64 63 67 66 63 64 63 63 1509 1506 1502 1513 1508 64
24 64 64 64 68 67 63 64 64 63 1510 1509 1502 1513 1509 65
25 64 65 64 69 68 64 65 65 63 1513 1509 1507 1514 1511 65
26 64 65 64 69 68 64 65 65 63 1517 1510 1504 1514 1511 65
27 65 66 65 70 69 65 65 66 64 1517 1517 1513 1518 1516 66
28 65 67 65 71 70 65 66 66 64 1525 1521 1498 1523 1517 66
29 66 67 65 72 71 65 67 67 64 1524 1519 1517 1526 1521 67
30 66 68 66 73 72 66 67 67 65 1523 1525 1522 1525 1524 68
31 67 69 66 74 73 66 68 68 65 1538 1536 1533 1532 1535 68
32 67 69 66 75 74 66 68 68 66 1554 1547 1544 1557 1550 69
33 68 70 67 76 75 67 69 69 66 1570 1572 1564 1574 1570 70
34 68 71 67 78 76 67 70 69 67 1597 1580 1575 1591 1586 70
35 69 72 68 79 78 68 70 70 67 1569 1566 1567 1572 1569 71
36 69 73 68 81 79 68 71 71 68 1573 1564 1568 1575 1570 72
37 70 75 68 83 81 68 72 71 68 826 1572 1572 1327 1324 73
38 70 76 69 84 82 69 72 72 69 1591 1588 1582 1588 1587 74
39 71 77 69 86 84 69 73 73 69 1592 1592 1589 1598 1593 75
40 71 78 70 88 86 70 74 73 70 1604 1597 1599 1606 1602 75
41 72 79 70 90 87 70 74 74 71 827 1603 1599 1350 1345 76
42 72 80 71 91 89 71 75 74 71 1611 1606 1609 1617 1611 77
43 73 82 71 93 91 71 76 75 72 1618 1617 1611 1621 1617 78
44 73 83 71 95 92 72 76 75 72 1619 1617 1614 1626 1619 79
45 73 84 72 97 94 72 77 76 73 1621 1621 1619 1622 1621 80
46 74 85 72 99 96 72 78 76 73 1628 1623 1624 1630 1626 81
47 74 87 72 101 98 73 79 77 74 1091 1626 1629 1454 1450 82
48 75 88 73 103 100 73 79 78 74 463 1630 1634 1252 1245 83
49 75 89 73 105 101 73 80 78 75 1646 1641 1644 1653 1646 83
50 76 91 74 107 103 74 81 79 76 1645 1647 1646 1652 1647 84
51 76 92 74 109 105 74 81 80 76 1654 1648 1646 1654 1651 85
52 76 93 75 112 107 75 82 80 77 1664 1664 1666 1667 1665 86
53 77 95 75 114 109 75 83 81 77 1674 1677 1675 1683 1677 87
54 77 96 75 116 111 76 84 81 78 1680 1683 1681 1687 1683 88
55 78 98 76 118 113 76 85 82 79 1685 1689 1685 1687 1687 89
56 79 99 77 120 114 77 85 83 79 1696 1691 1695 1699 1695 90
57 79 101 77 123 117 77 86 84 80 1692 1693 1694 1702 1695 92
58 80 102 77 125 118 78 87 85 81 1701 1701 1698 1705 1701 93
59 80 104 78 127 120 78 88 86 82 1711 1706 1706 1714 1709 94
60 81 105 79 129 123 79 89 87 82 1709 1708 1707 1713 1709 95
61 81 107 80 132 125 80 90 88 83 1710 1707 1710 1715 1710 96
62 82 109 80 134 126 81 91 89 84 1709 1714 1713 1716 1713 97
63 83 110 81 136 129 81 92 90 85 1717 1719 1717 1719 1718 99
64 84 112 82 139 131 82 93 91 86 1723 1723 1718 1729 1723 100
65 84 114 83 141 133 83 95 93 87 1720 1717 1720 1722 1720 101
66 85 115 83 143 135 83 96 94 88 1708 1708 1705 1712 1708 102
67 86 117 84 146 137 84 97 96 88 1718 1720 1716 1724 1719 104
68 87 119 85 148 139 85 98 97 90 1724 1728 1725 1731 1727 105
69 88 121 86 150 141 86 100 98 90 1731 1730 1728 1731 1730 107
70 89 122 87 153 143 87 101 100 91 1735 1734 1737 1738 1736 108
71 90 124 88 155 145 88 102 101 92 1738 1734 1736 1741 1737 110
72 90 126 89 157 148 89 104 103 93 1744 1740 1741 1746 1743 111
73 91 128 90 159 149 90 105 104 95 1750 1743 1745 1752 1748 112
74 92 129 91 162 152 91 106 106 96 1749 1750 1746 1752 1749 114
75 93 131 92 164 154 92 108 107 97 1755 1751 1748 1756 1752 115
76 94 133 93 166 156 94 109 109 98 1751 1750 1750 1751 1751 117
77 95 135 94 169 159 95 110 110 99 1754 1756 1754 1755 1755 118
78 97 137 95 171 161 96 112 112 100 1759 1758 1755 1765 1759 120
79 97 139 96 173 163 97 113 113 101 1759 1759 1760 1767 1761 121
80 99 140 97 175 165 98 115 115 102 1756 1759 1760 1764 1760 123
81 100 142 98 177 167 99 116 116 103 1762 1762 1760 1769 1763 124
82 101 144 99 180 169 101 118 118 105 1768 1762 1766 1769 1766 126
83 102 146 100 182 171 102 119 119 106 1762 1761 1764 1771 1765 127
84 103 148 101 183 173 103 121 121 107 1765 1764 1764 1769 1766 129
85 104 149 102 186 175 104 122 122 108 1771 1769 1769 1773 1770 130
86 105 152 103 187 177 106 124 123 109 1761 1764 1765 1773 1766 132
87 106 154 105 189 179 107 125 125 111 1770 1765 1767 1776 1770 133
88 107 155 106 191 181 108 127 127 112 1769 1769 1768 1769 1769 135
89 108 157 107 193 183 110 128 128 113 1772 1774 1770 1776 1773 136
90 109 159 108 195 185 111 130 130 114 1769 1770 1771 1770 1770 138
91 110 160 109 197 187 112 132 131 116 1770 1773 1773 1780 1774 139
92 112 162 110 199 188 113 133 133 117 1775 1775 1776 1781 1776 141
93 113 164 111 200 190 115 135 134 118 1770 1770 1774 1777 1773 142
94 114 166 112 201 191 116 136 136 119 1767 1771 1769 1772 1770 144
95 115 168 113 203 193 117 137 137 120 1777 1772 1773 1775 1774 145
96 116 169 115 204 194 118 139 139 122 1782 1781 1786 1785 1784 146
97 117 171 116 206 196 119 141 140 123 1796 1792 1792 1799 1795 147
98 118 173 117 207 197 121 142 141 124 1803 1801 1801 1805 1803 149
99 119 174 118 208 198 122 144 143 125 1807 1810 1808 1817 1810 150
100 120 176 119 209 199 123 145 144 127 1813 1815 1816 1816 1815 151
101 121 178 120 210 200 124 147 146 128 1818 1818 1818 1824 1819 153
102 122 179 121 211 201 125 148 148 129 1821 1818 1823 1831 1823 154
103 123 181 122 212 202 126 149 149 131 1827 1824 1825 1832 1827 155
104 124 183 123 213 203 128 151 151 132 1825 1823 1824 1828 1825 156
105 125 184 124 214 204 129 152 152 133 1835 1835 1830 1833 1833 158
106 125 185 126 216 205 131 154 153 135 1832 1832 1832 1836 1833 159
107 126 187 127 217 207 132 155 155 136 1832 1829 1834 1833 1832 160
108 127 188 128 218 208 133 157 156 137 1835 1838 1838 1846 1839 161
109 129 189 129 219 208 134 158 158 138 1840 1833 1831 1840 1836 163
110 130 191 130 220 209 136 159 159 140 1835 1830 1838 1843 1836 164
111 131 192 131 221 211 137 160 160 141 1837 1838 1839 1844 1840 165
112 132 194 132 222 212 138 162 162 142 1836 1834 1836 1836 1835 166
113 133 195 133 223 213 139 163 163 144 1842 1839 1835 1841 1839 167
114 134 196 134 225 214 140 164 164 145 1843 1841 1838 1845 1842 169
115 135 197 135 226 215 142 166 166 147 1841 1839 1836 1839 1839 170
116 136 199 136 227 216 143 167 167 148 1842 1838 1837 1842 1840 171
117 137 200 137 228 217 144 168 169 149 1846 1843 1839 1846 1843 172
118 138 201 138 229 219 145 170 170 150 1842 1843 1832 1843 1840 173
119 139 202 139 230 220 147 171 171 152 1848 1831 1829 1842 1837 174
120 140 203 140 231 221 148 172 172 153 1848 1837 1829 1842 1839 176
121 141 204 141 233 222 149 173 174 154 1840 1834 1829 1843 1836 177
122 142 205 142 234 223 150 175 175 156 1806 1826 1827 1828 1822 178
123 143 206 143 236 225 151 176 176 157 1814 1833 1845 1832 1831 179
124 144 207 144 237 225 152 178 177 158 1816 1844 1855 1840 1839 180
125 145 208 145 239 227 154 179 179 160 1803 1845 1854 1837 1835 181
126 146 209 146 240 228 155 180 179 161 1804 1844 1851 1835 1833 183

May 23, 2008

Download:MEA 206-08-M – (2 Hour) 3/4″ Armoroc directly over Marino/WARE JoistRite Joists – 2-Hour Test Report